The Vulcan Seals Type 126 seal is a robust, 'O'-ring mounted "pusher" seal design with a narrow cross-section monolithic stainless steel head. The Vulcan Seals Type 126 is a variant of the popular Vulcan Seals Type 12DIN that provides full DIN24960/En12756 L1K compatibility.
The seal drive is provided by the conical spring tightly gripping the equipment shaft at its drive end. Conical spring seals are mono-directional and have differential part codes for clockwise or anti-clockwise operation.
The Vulcan Seals Type 126 complete seal is supplied with the Vulcan Seals Type 12DIN stationary to suit DIN24960/En12756 housing sizes.
Our products are expertly designed to meet and exceed reliability, compliance and performance expectations.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
