Vulcan Seals Type 142DINS is a radially-compact elastomer bellows "non-pusher" design, with high flexibility to readily accommodate service misalignment and provide extended service in medias prone to clogging.
The seal drive is provided by the elastomer bellows tightly gripping the shaft from a contact point under the coil end, providing bi-directional "non-pusher" performance that minimises shaft fretting.
Supplied with a Vulcan Seals Type 8.DINS boot-mounted stationary, the Vulcan Seals Type 142DINS is fully compliant to DIN24960/En12756 L1K length seal chamber dimensions.
Our products are expertly designed to meet and exceed reliability, compliance and performance expectations.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
