The Vulcan Seals Type 52B is a robust, modular construction, 'O'-ring mounted four-bolt gland cartridge seal assembly, without flush connections. The drive from the shaft is by set screws tightened using the supplied Allen key.
The seal assembly is supplied pre-set and only requires mounting on the flange bolts prior to tightening the set screws. The multi-spring array and rotary face profile provide even closing forces and hydraulic balancing giving improved pV capability, higher sealing performance, and longer seal life in challenging industrial applications when compared to single-spring seal designs.
Our products are expertly designed to meet and exceed reliability, compliance and performance expectations.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
A highly proficient, widely utilised, 'O'-ring mounted, shaft directional dependent, conical spring mechanical seal.
Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.
The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.
